You want something new and want change wheel rim sticker kit Or have your wheel rims seen better days, with your decals peeling or faded? Perhaps it's time for a change.
To do this, you can throw away your wheel rims and buy new ones. Or follow this guide to learn how to remove motorcycle wheel rim decals without massacring your wheel rims. 😉

Whether you're installing a new kit or seeking a cleaner look, don't remove your stickers haphazardly or with just any product.

 

Applying motorcycle rim stickers

In case of Approximate installationYou forgot to scrape, admit it) or from extreme constraints, we think of you, cross bikers... Your decals are damaged or peeled off.😢

It is preferable toremove the stickers completely rather than trying to re-glue them with a product that could be corrosive and damage the wheel rim.
Okay, if you planned to restick decals in the exact same spot, it's not a disaster, but damaging your motorbike is never a pleasant moment.
Avoid scratching with your nails for too long, or risk losing one! 😱

Therefore, it is better to remove the sticker and then restoring brand new And why not take the opportunity to change your style.

How to do it?

There are several ways to take off His stickers. The idea is nonetheless to choose a version The least harmful Possible for your rims.
Heat its rim is surely what will facilitate your removal the most. If you start scraping dry, it might be very complicated.
And when the sticker is removed, how remove adhesive residue It is ultimately this step that is often problematic.
Often found on the internet are the tips on WD40, with gasoline or even solvent, but these products are still corrosive and could damage your wheel rims. Not to mention the cost of gasoline these days...🤪

You therefore have a choice of several methods.

Tip 1

To easily remove stickers, you will need:

• a hairdryer or, even better, a heat gun.

(It might still be lingering in your garage from the episode Sticker application. 😁
Alternatively, some DIY stores rent tools, or you surely have a friend who can help you out.

• Of a rag,
• Of a Raclette,
• With a sponge,
• Soap water

Start with heat the wheel rim, a hairdryer may be sufficient, but if you did a good job during installation and it is recent, a heat gun may be a good idea.

Be careful not to burn your fingers after heating when removing the sticker. 

After warming up, use a Raclette Or a fingernail (carefully), to lift an edge and begin pulling.
If the sticker comes on easily, great, if it's more difficult, heat it a little more.

Arm yourself with patience, and warm soapy water will be your best friend. Scrub the affected areas, and when dry, repeat the process.

 

Tip 2

In the magic and versatile product category, one often finds the white vinegar.
A lower cost, yet so many possibilities...
The one that interests us here is its ability to Dissolve the glue.

To remove stickers with vinegar, soak a sponge in white vinegar and Imbibe The sticker. You can hold the sticker down so the vinegar thoroughly saturates it and penetrates the adhesive.

Let it act for 30 minutes And when the ends of the sticker come loose, begin pulling.
You can apply vinegar to stubborn areas.

When the sticker is removed, rinse with clear water.
No harmful product on the rim and no risk of scratches! The sticker acts as a natural solvent and leaves no trace.

Tip 3

If hot, soapy water or white vinegar absolutely do not work or/and you are not patient, you will find some products For taking off in DIY stores or online sites. Don't hesitate to ask a salesperson or read the instructions about recommended surfaces to avoid damaging your surface.

In that case, it is recommended totry out their productUse a small area, perhaps an inconspicuous section of the rim, to ensure the product is harmless to the surface.
Heat the rim upstream to soften the Stickers And once removed, use your product to remove glue stains.

You can also try hairspray, sprayed onto the glue, then rubbed afterward.

It is important to rinse with soapy water and thoroughly dry any area that has been in contact with a strong chemical. This limits the risk of aggression of the rim.

 

How to remove motorcycle wheel rim decals – installing new decals

You have removed your old stickers and want some new ones apply new ?
Change your style or choose stickers rings or simply some edgings ?
Make sure to clean the rim or wait a bit.
Indeed, depending on the product used, The adhesion of the stickers could be compromised.
If you've used a chemical product, in particular. Sometimes WD-40 is used to remove stickers, but this product should be avoided when applying them.

Clean Wash your rim with soapy water and degrease its surface before application.

Conclusion – remove motorcycle rim stickers

If you have questions about removing decals, you can Contact us here.
You can also share your Tested and proven tips For this kind of maneuver. 😄✌️🏍

And if you want high-quality, permanent stickers, you've come to the right place, as our stickers are high-quality: permanent adhesive, vinyl. High-end varnish and 100% French and 100% customizable !