Stickers rim Kawasaki Ninja 650 - Cyan - Retro reflective
Le prix initial était : 80,00€.60,00€Le prix actuel est : 60,00€.
Destocking
Stickers rim Kawasaki Ninja 650 - Cyan:
Boost the look of your motorcycle easily and cheaply? It is possible!
Whether it is to make it sporty, attract the eye or sell it quickly.
Stickers motorcycle rim kawasaki motorcycle 17 inch Ninja 650 for 2 rims includes :
- 8mm pre-curved edgings with 8 small stickers Kawasaki and 8 small stickers Ninja 650 for the 2 rims
- 4 Stickers rim interiors Kawasaki
- 4 Stickers Ninja 650 rim interiors
- 1 Logos Kawasaki
- 8 Stickers additional Electro
1 in stock
Description
Destocking
Stickers rim Kawasaki Ninja 650 - Cyan - Retro reflective :
Stickers rim Kawasaki Ninja 650 (kit for 2 rims) :
Stickers motorcycle rim kawasaki motorcycle 17 inch Ninja 650 for 2 rims includes :
- 8mm pre-curved edgings with 8 small stickers Kawasaki and 8 small stickers Ninja 650 for the 2 rims
- 4 Stickers rim interiors Kawasaki
- 4 Stickers Ninja 650 rim interiors
- 1 Logos Kawasaki
- 8 Stickers additional Electro
- Professional quality with permanent hold*.
*autocollants avec colle monomère 100? qui permet une tenue permanente mais aussi une résistance aux projections d’eau et aux UV.
Nos Vinyles haute qualité sont conçus et fabriqués en France.
Stickers motorcycle rims Kawasaki Ninja 650 - how to fit them?
The stickers rim kit Kawasaki Ninja 650 is easy to install, whatever the rim size or surface, the procedure remains the same. Below is a tutorial to help you install your stickers Ninja 650 rim kit correctly. First of all, here are the precautions to take:
- Check that the rim is perfectly smooth.
- Clean and degrease the rim with soap/alcohol water. Do not use WD40 or other products with silicone. The rim must be perfectly clean.
- Do not handle the stickers on the glue side.
- If the stickers are not installed immediately, store them in a dry place out of the sun.
-  At the time of the installation, choose a room with a temperature of at least 15°c, sheltered from wind and dust. It is also possible to heat the rim before installing the stickers to ensure a good adhesion of the adhesives. A too cold temperature will not allow an optimal adhesion of the stickers.
- Add our scraper to your Order to not miss the installation of your stickers motorcycle rim
- After the installation, avoid contact with cold and humidity to guarantee a good adhesion of the adhesives
Additional information
Weight | 250 g |
---|---|
Size | 30 × 60 × 40 cm |
Notice
There are no reviews yet.